Cisco Systems

  1. Home
  2. Cisco Systems
14705 Threads Posts
to

Worth reading in Cisco Systems

ACL layer 2 on routers.

Hi all, I would like to limit the access to other networks only for specific MAC addresses. Is it possible to apply Laye...
1 comments posted 20yrs
posted by am
1 comments posted 20yrs posted by am

smartnet

What would be the smartnet for a 3640. Thanks in advance Dave
2 comments posted 20yrs
posted by dmc
2 comments posted 20yrs posted by dmc

Calculation of reliability metric

Hi friends, I just wanted to know how the value of reliability metric is calculated? I always see it 255/255 for any nu...
0 comments posted 20yrs
posted by gautamzone
0 comments posted 20yrs posted by gautamzone

CiscoWorks and CiscoSecure ACS

Hi, Just wondering if anyone knew of any issues between running both these apps on the same server. Our existing server...
0 comments posted 20yrs
posted by neil.montgomery
0 comments posted 20yrs posted by neil.montgomery

ISDN PRI dial in problems

Hello all, I have been trying to configure a Cisco 3745 as an access server with a PRI module for ISDN dial in. The pro...
2 comments posted 20yrs
posted by sayeeda_shireen
2 comments posted 20yrs posted by sayeeda_shireen

Port translation with PIX 506E

I am not too sure this is the correct term but what I need is to get the external address 1.2.3.4 port 25 to go inside...
3 comments posted 20yrs
posted by c_croitoru
3 comments posted 20yrs posted by c_croitoru

DNS resolution fails on Cisco 2821

I have a cisco 2821 Intergrated Router. I have set the DNS address to our typical DNS and when I ssh into the cisco box...
1 comments posted 20yrs
posted by JeffersonAllen
1 comments posted 20yrs posted by JeffersonAllen

HPQ VPN Client V4

Hello, We have a Cisco PIX 535 installed on the network. There is a user connected to inside network to access internet...
0 comments posted 20yrs
posted by angelinea
0 comments posted 20yrs posted by angelinea

Cisco Memory

Is there any significant difference (other than service contract) between Cisco memory for routers verses third party,...
3 comments posted 20yrs
posted by burt
3 comments posted 20yrs posted by burt

Cisco AS5300 - Change Clock Source

I am trying to change the "clock source" field for our T1 on a Cisco AS5300. Can anyone give me any pointers on how to...
1 comments posted 20yrs
posted by jeremy.miller
1 comments posted 20yrs posted by jeremy.miller

Help with my config

Hi All, I am looking at my config on a remote router configured with xDSL as primary over a tunnel with isdn back up. I...
4 comments posted 20yrs
posted by rhltechie
4 comments posted 20yrs posted by rhltechie