Cisco Systems

  1. Home
  2. Cisco Systems
14705 Threads Posts
to

Worth reading in Cisco Systems

access-list stops telnet

Hi, I have a small remote office with 2 office machines(known users) and few public machines (unknown users), the publi...
5 comments posted 20yrs
posted by Rob
5 comments posted 20yrs posted by Rob

EARL L3 ASIC error on C6509

I am seeing this error on one of our router: %EARL_L3_ASIC-DFC7-3-INTR_WARN: EARL L3 ASIC: Non-fatal interrupt Packet Pa...
4 comments posted 20yrs
posted by doan
4 comments posted 20yrs posted by doan

No output from show command

I'm having a problem using the show commands on a WS-4003 switch. When I telnet to the switch, the show command will no...
0 comments posted 20yrs
posted by ejlackey
0 comments posted 20yrs posted by ejlackey

HARDWARE cef or SOFTWARE cef ?

Hi. I try to understand the L3 switching issues on the Catalyst range switches. As I already know MLS was the mechanism...
2 comments posted 20yrs
posted by henry07552002
2 comments posted 20yrs posted by henry07552002

PAgP - silent and non-silent modes

Can anyone clarify if the differences between the silent and non-silent modes for PAgP. As I understand it if the mode...
1 comments posted 20yrs
posted by andymc_myammi
1 comments posted 20yrs posted by andymc_myammi

PIX 515 and 7.0.2 problem - Incomplete

Hi all, I created a nested group on the PIX in the subject. Moreover I have a icmp permit rule on outside interface for...
0 comments posted 20yrs
posted by am
0 comments posted 20yrs posted by am

Cisco Avaya 802.1q issue...

Hi, I have several Cisco 3750's being trunked into an AVAYA P332 Core. Lab tests go great and all 7 vlans are interconn...
1 comments posted 20yrs
posted by traust
1 comments posted 20yrs posted by traust

Cisco VPN3002 - Public orPrivate IP

Hi, Can I configure the VPN 3002 to work with the internal IP which I get from my ADSL router to connect to the central...
1 comments posted 20yrs
posted by yaron.regev
1 comments posted 20yrs posted by yaron.regev

PIX 506e Vlan DMZ issues

Hi everyone I hope someone can point me in the right direction. I have a T1 line coming into an Adtran Router that's do...
9 comments posted 20yrs
posted by lpassarella
9 comments posted 20yrs posted by lpassarella

Help w/ WIC-1DSU-T1 in 2621

I have a used WIC-1DSU-T1 that will work in a Cisco 2620 but not a 2621. The WIC works in the following: Cisco 2620, IO...
1 comments posted 20yrs
posted by sparker69
1 comments posted 20yrs posted by sparker69

Influencing OSPF Routes

I have a 2 Cisco routers and a Cisco VPN concentrator in parallel, plus there is another cisco router sitting behind th...
4 comments posted 20yrs
posted by amospjohnson
4 comments posted 20yrs posted by amospjohnson

Uninstall VPN Client 4.6

Hi All I've installed the VPN Client Software 4.6 from Cisco on my system with the Microsoft Installer. I try to uninst...
1 comments posted 20yrs
posted by tinu.downunder
1 comments posted 20yrs posted by tinu.downunder