Cisco Systems

  1. Home
  2. Cisco Systems
14701 Threads Posts
to

Changing native vlan on access port

I've have a scenario where a cisco switch is being connected to a switch that doesn't support Vlans. That 2nd switch is...
2 comments posted 16yrs
posted by dclangst
2 comments posted 16yrs posted by dclangst

req help with access-list config

cisco 2651XM router IOS: c2600-adventerprisek9-mz.124-15.T8.bin with adsl card (Dialer0) I'm struggling to knock up an...
15 comments posted 16yrs
posted by nospam
15 comments posted 16yrs posted by nospam

Mac adress drop

Hello We are using a 802.1 x authentication scheme, using cisco acs and agent, active directory and switch 3560 I have...
0 comments posted 16yrs
posted by lemaire.mathias
0 comments posted 16yrs posted by lemaire.mathias

Ethernet frames with DEI bit on 7600

Hi, I am aware of the fact that 7600 does not support Color Aware Policers. What is the behavior of the 7600 regarding...
0 comments posted 16yrs
posted by alexander.kugel
0 comments posted 16yrs posted by alexander.kugel

3750 stackwise

I'm trying to stack 3 x 3750 together and am having problems: The first two 2 are OK - both WS-C3750G-48TS, switch 1 st...
2 comments posted 16yrs
posted by nedtrilby
2 comments posted 16yrs posted by nedtrilby

Layer 3 ACL and two Cisco switches.

Hi all, I have the following configuration: My backbone switch Cisco 3560 with 18 VLANs. I have L3 ACLs applied on 6 VL...
3 comments posted 16yrs
posted by aprzestroga
3 comments posted 16yrs posted by aprzestroga

Exposing multiple VLANs to host

Hi all, Sorry for the lame question, but I got confused. I am in need to expose 7 VLANs to a host. I know that to do th...
9 comments posted 16yrs
posted by aprzestroga
9 comments posted 16yrs posted by aprzestroga

pix 506 nat or pat

I have a situation where the mail server is sending out as .198(the external interface)and not .194, where the reverse...
3 comments posted 16yrs
posted by mmark751969
3 comments posted 16yrs posted by mmark751969

Traffic bursts when using ATM PVC

Hi, This is our setup in a nutshell: Server (100Mb NIC) --> router (100Mb) --> T1 ATM (IMA) PVC --> 128kb client circui...
7 comments posted 16yrs
posted by unixzip
7 comments posted 16yrs posted by unixzip

Questions on 6500 series

We're looking at replacing a 4507R at the core of our network with a 6500 series. Currently, the 4507R has a supervisor...
7 comments posted 16yrs
posted by pfisterfarm
7 comments posted 16yrs posted by pfisterfarm

Ping issue?

Hi there, I have a Cisco 2821. I currently am using 2x ADSL lines bonded via MLPPP. I have a static ip on Dialer 1 (bot...
0 comments posted 16yrs
posted by jbaker
0 comments posted 16yrs posted by jbaker

With BGP spilt horizon rule, how can i make routing?

With BGP spilt horizon rule, how can i make routing if router will not advertise routes that learned from another IBGP r...
4 comments posted 16yrs
posted by cisco_crazy
4 comments posted 16yrs posted by cisco_crazy

ASA5505 is blocking outgoing SMTP

Hello, I've got a problem with Ciscos ASA5505. We have several of them in use and all share the same problem. When the...
12 comments posted 16yrs
posted by stma
12 comments posted 16yrs posted by stma