Cisco Systems

Garbage in 2620xm router rommon and error messages

I have a 2620xm router that has some lingering config left in rommon that looks like it was trying to boot from tftp. I...

15 comments posted 16yrs

posted by swp

15 comments posted 16yrs posted by swp

reset port settings to defaults

I've been messing around with the settings of one of my FastEthernet ports on a 2600 router and I think I've made a mes...

2 comments posted 16yrs

posted by nospam

2 comments posted 16yrs posted by nospam

Cisco AS53(4)00 specific call handling

Hello, I'm interested if it is possible to implement functionality in AS5300/AS5400 which will receive call over ISDN P...

2 comments posted 16yrs

posted by mskomersicOVO

2 comments posted 16yrs posted by mskomersicOVO

cisco asa monitoring ipsec sa through snmp

hi guys, is there a way to monitor all ipsec sa´s using snmp? i tunnel a couple of diffent networks using the same tunn...

4 comments posted 16yrs

posted by steuer

4 comments posted 16yrs posted by steuer

Using Aironet 1142n with Cisco 1801 Router

Hi Group, I have a Cisco 1801 router the I use for wired connections on my local network. I would like to install a Air...

6 comments posted 16yrs

posted by stuie_norris

6 comments posted 16yrs posted by stuie_norris

Cisco 3845 - DSL on interface, how to do PPPOE??

Greetings! I am sticking a DSL modem (ethernet on LAN side) into one for the interfaces on this Cisco router. The modem...

3 comments posted 16yrs

posted by ponga

3 comments posted 16yrs posted by ponga

WebVPN disconnecting

Remote VPN clients are disconnecting after several hours and I have to reboot ASA to reconnect: Here is the config ASA...

2 comments posted 16yrs

posted by braydonsdad

2 comments posted 16yrs posted by braydonsdad

monitor traffic on port 2600 router

cisco 2651XM router IOS: c2600-adventerprisek9-mz.124-15.T8.bin I want to monitor live traffic on a network port and ou...

3 comments posted 16yrs

posted by nospam

3 comments posted 16yrs posted by nospam

SNMP trap configuration

Hi, Occasionally our monitoring system receives a syslog trap from a cisco router indicating for example high memory ut...

0 comments posted 16yrs

posted by QoS

0 comments posted 16yrs posted by QoS

several nat overload

Hello! I want to have two nat overload Gi 0/0 is internal interface with nat inside Gi 0/0.5 is external with nat outsi...

2 comments posted 16yrs

posted by dm

2 comments posted 16yrs posted by dm

aironet aes encryption

i have an aironet 1130ag access point in standalone mode. I would like to set a more advanced encryption level than wep...

5 comments posted 16yrs

posted by mmark751969

5 comments posted 16yrs posted by mmark751969

Anyone know how to get two aironet 1300 to bridge VLANS

Hello, Please help! I am completely stuck so even some untested ideas would be welcome. I have two wired (VLAN) network...

1 comments posted 16yrs

posted by stuart

1 comments posted 16yrs posted by stuart

Help with Cisco ASA w/CSC-SSM and WCCP Configuration..

I figured I would post here and see if anyone has set this up before, and come across a decent solution for the issue I...

1 comments posted 16yrs

posted by no

1 comments posted 16yrs posted by no

Where's "mac-address-table secure" on newer Catalyst switches?

For the sake of context, you may assume that the mention of any VLAN id in this discussion is maintained throughout the...

2 comments posted 16yrs

posted by DAVISM

2 comments posted 16yrs posted by DAVISM

ME 3400 and Wavelength

Ok, so this is a weird question... Cogent is trying to sell me some bandwidth, but I think their sales people are lying...

1 comments posted 16yrs

posted by john

1 comments posted 16yrs posted by john