Cisco Systems

Strange looping like behavior on aeronet 1300 link

Hello, I have set up a point to point WiFi link using two aeronet 1300 Access point / bridges. At each end the 1300 is...

0 comments posted 16yrs

posted by stuart

0 comments posted 16yrs posted by stuart

FTP configuration on router

Hi, Can anyone tell me how to configure the router in order support workstation behind the router connect to passive FT...

1 comments posted 16yrs

posted by fogqb

1 comments posted 16yrs posted by fogqb

Need guidance on access lists and NAT (870 router)

On an 870 router: I can get the ADSl connection to work. From what I gather: [modem]->[FA 4] -> [DIALER 1] -> [BVI 10]...

1 comments posted 16yrs

posted by jfmezei.spamnot

1 comments posted 16yrs posted by jfmezei.spamnot

Nokia VPN SIS.file

Dear Freind any one can help me how i can create for nokia vpn with cisco router & as well for nokia vpn client policy m...

0 comments posted 16yrs

posted by taherudin

0 comments posted 16yrs posted by taherudin

ASDM certificate error

I have a Cisco ASA 5510 with an IPS module in it. When trying to connect to this unit with ASDM on port 8443 I get an e...

0 comments posted 16yrs

posted by tld

0 comments posted 16yrs posted by tld

Smiling Dog

http://www.googlyfoogly.com/pictures/Smiling-Dog.html Many ways to make your dog happy.This is an example .

0 comments posted 16yrs

posted by snehachatterje

0 comments posted 16yrs posted by snehachatterje

Replacing two routers with a single (multi)modular one: help with routes

Hi, I need to replace a cisco 837 (connected to an adsl circuit) and a 1720 (connected to an HDSL circuit via a serial...

3 comments posted 16yrs

posted by guido_brasletti

3 comments posted 16yrs posted by guido_brasletti

NetFlow on a Catalyst 650

Hey all, Found a good article that might help anyone enabling NetFlow on our 6500's....

0 comments posted 16yrs

posted by nathanhalverson_at_gmail_dot_c

0 comments posted 16yrs posted by nathanhalverson_at_gmail_dot_c

NetFlow and ASA

Hi, I'm currently running 8.2(1) on an ASA. This release supports NetFlow (via the flow-export commands). However, none...

6 comments posted 16yrs

posted by user

6 comments posted 16yrs posted by user

acl issue on asa

ve a real problem configuring acl on the ASA 8.0(3) it is just a single acl that i m trying (config) access-list OUTSID...

8 comments posted 16yrs

posted by lao.ignace

8 comments posted 16yrs posted by lao.ignace

Switch ACL config (3550-SMI)

So I am not too familiar with switch ACLs, I mainly used ASA or PIX. But I have an environment where I want to do switc...

1 comments posted 16yrs

posted by john

1 comments posted 16yrs posted by john

Bridge warning?

I am looking for the IOS and CatOS command that will either log a warning message or shut down the interface, if a user...

2 comments posted 16yrs

posted by Lovejoy1

2 comments posted 16yrs posted by Lovejoy1

NAT: default host to route incoming calls to ?

Say I have something like: ip nat inside source static tcp 10.0.0.11 25 interface Dialer1 25 ip nat inside source stati...

4 comments posted 16yrs

posted by jfmezei.spamnot

4 comments posted 16yrs posted by jfmezei.spamnot

my acl does not work on asa

I ve a real problem configuring acl on the ASA 8.0(3) it is just a single acl that i m trying (config) access-list OUTS...

5 comments posted 16yrs

posted by lao.ignace

5 comments posted 16yrs posted by lao.ignace

Internet speed on MPLS-VPN network

Hi, I'm having an issue and I could use some help. We have an MPLS-VPN network. All remote sites are connected to the h...

8 comments posted 16yrs

posted by geoar75

8 comments posted 16yrs posted by geoar75