Cisco Systems

General Networking Help

We are having an issue that I could use some help on. We need to connect two networks together, we'll call them network...

3 comments posted 18yrs

posted by trampski

3 comments posted 18yrs posted by trampski

Back-to-back ATM with VWIC-2MFT-E1 modules ????

Hello, I have 2 Cisco 2811 with 1 AIM module (slot 0) and 1 VWIC-2MFT-E1 module (HWIC 1). I connected them with a back-...

2 comments posted 18yrs

posted by egamess

2 comments posted 18yrs posted by egamess

Internal Power Supply for Catalyst 2960

Hello, The internal power supply on my 2960 has blown and I need a new one. I've asked the TAC for a part number and th...

4 comments posted 18yrs

posted by 10

4 comments posted 18yrs posted by 10

Cisco VPN client access to PIX501's internal network

Hi, I have a PIX501 (PIX1) in front of some servers. The servers are accessed thug some VPN tunnels (site to site) and...

1 comments posted 18yrs

posted by M

1 comments posted 18yrs posted by M

Problem setting of PIX 501 - no internet access

Hello, The PIX 501 is connected to ISP via PPPoE conection and internal DHCP. All connections are OK, but it is not pos...

1 comments posted 18yrs

posted by bkovatchev

1 comments posted 18yrs posted by bkovatchev

Fail to Convert Aironet 1242 from lightweight mode back to autonomous mode

Hi, I just purchased Aironet 1242 access point and want to convert the AP from lightweight mode back to autonomous mode...

2 comments posted 18yrs

posted by Indo.Manna

2 comments posted 18yrs posted by Indo.Manna

Bandwidth test for a 20Gb link

Hi, I have 2x3750E with 2x10Gbps link between them. I've configure an etherchannel between the switch to obtain a 20Gbps...

5 comments posted 18yrs

posted by guercio

5 comments posted 18yrs posted by guercio

Advice to be recertified CCNA

Hi, I was certified CCNA in October 2000 and i've been working in Cisco networking as engineer for seven years. I'd lik...

12 comments posted 18yrs

posted by yewsef

12 comments posted 18yrs posted by yewsef

VPN tunnel to Cisco 1721. By del_lover

Problem: I want to setup Cisco 1721 + Microsoft IAS RADIUS/Active Directory for VPN access. Solve: (cisco side example)...

0 comments posted 18yrs

posted by dellover

0 comments posted 18yrs posted by dellover

multiple mac-address on access port (with only one server connected)

Hi All I noticed a strange things regarding some access port on a 3550 switch. I see two mac-address when I issue "sh m...

11 comments posted 18yrs

posted by tricaricog

11 comments posted 18yrs posted by tricaricog

Getting hold of IOS upgrades

Hi, I've bought my Cisco lab second hand & would like to upgrade the IOS software, unfortunately I can't upgrade my Cis...

6 comments posted 18yrs

posted by spamspamspam

6 comments posted 18yrs posted by spamspamspam

CCIE-Security

Hi Guys, How are you ? I am planning to start CCIE-Security SOON.. But i dont have study material and some guidence for...

7 comments posted 18yrs

posted by chetan.kamra

7 comments posted 18yrs posted by chetan.kamra

MTU with Site to Site VPN

New to this so bear with me. Just set up a site to site IPSec connection with a site we have in Brasil. On the US side...

0 comments posted 18yrs

posted by noone

0 comments posted 18yrs posted by noone

Cisco 1800 with PPTP (VPN Server)

I use a Cisco 1812 as a PPTP server for vpns. Everything is working fine but i cant see a lot brute force attack on the...

6 comments posted 18yrs

posted by xaviveral

6 comments posted 18yrs posted by xaviveral

NAT Question

Hello, I've a general concept of routing down, and some cisco under my belt, but I'm having to do something I've never...

0 comments posted 18yrs

posted by jimsu1973

0 comments posted 18yrs posted by jimsu1973