Wireless Access Point Security

Hello All, Does anyone know if it is possible to change the web interface on a

1231 Cisco Access Point from http to https?


Reply to
Loading thread data ...

You should be able to enter 'ip http secure-server' to enable https.

If this is the first time entering it, the machine will auto generate a self signed certificate. Do a 'show run' and you'll see the certificate information. You can then disable the standard http by doing a 'no ip http server'

Also, you can setup the http to use the authentication scheme that you use to login to the router. You can enter 'ip http authentication local' if you use local passwords, or if you've defined an aaa model, do 'ip http authentication aaa'.

Hope that helps,


Reply to

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.