hi,
running this:
-- pixtgdpri# sh ver
Cisco PIX Security Appliance Software Version 7.0(4)
Compiled on Thu 13-Oct-05 21:43 by builders System image file is "flash:/image" Config file at boot was "startup-config"
pixtqq up 165 days 4 hours
Hardware: PIX-515E, 128 MB RAM, CPU Pentium II 433 MHz Flash E28F128J3 @ 0xfff00000, 16MB BIOS Flash AM29F400B @ 0xfffd8000, 32KB
Encryption hardware device : VAC+ (Crypto5823 revision 0x1) 0: Ext: Ethernet0 : address is 0014.a8ca.a5ea, irq 10 1: Ext: Ethernet1 : address is 0014.a8ca.a5eb, irq 11 2: Ext: Ethernet2 : address is 000d.8810.7f50, irq 11 3: Ext: Ethernet3 : address is 000d.8810.7f51, irq 10 4: Ext: Ethernet4 : address is 000d.8810.7f52, irq 9 5: Ext: Ethernet5 : address is 000d.8810.7f53, irq 5
Licensed features for this platform: Maximum Physical Interfaces : 6 Maximum VLANs : 25 Inside Hosts : Unlimited Failover : Active/Standby VPN-DES : Enabled VPN-3DES-AES : Enabled Cut-through Proxy : Enabled Guards : Enabled URL Filtering : Enabled Security Contexts : 2 GTP/GPRS : Disabled VPN Peers : Unlimited
This platform has a Failover Only-Active/Standby (FO) license.
Configuration last modified by enable_15 at 19:17:29.235 UTC Fri Apr 30 1993