1. Home
  2. Cisco Systems
  3. Upgrading IOS on uBRs

Upgrading IOS on uBRs

Trying to upgrade the IOS on a uBR 7100 but can not find any useful information online for the steps on how to do this? I have the file and have upgraded routers before, so am familiar with the process...but would like some step by step instructions for the uBR's.

Thanks

Reply to
uubozou1
Loading thread data ...

see

How to upgrade the boot image on the 7200 and uBR 7200 series router

formatting link

Cisco uBR7100 Series Universal Broadband Router Documentation Roadmap

formatting link

generic IOS upgrade procedure include ubr's

formatting link

Reply to
Merv

Thanks for your reply, no matter what I do I can not get the prompt to change to the normal prompt such as

Router>

instead it always says

Router(boot)>

Any ideas?

Thanks....

router

formatting link

Roadmap

formatting link

ubr's

formatting link

Reply to
uubozou1

That is the boot image prompt

see Cisco doc How to Upgrade from ROMmon Using the Boot Image

formatting link
on how to get an image into flash and then boot up that image

Reply to
Merv

You chose the boot image --> ubr7100-boot-mz.123-21a.BC4.bin You should have chosen either the DOCSIS 2-WAY BPI IP+ LAWFUL INTERCEPT DOCSIS 2-WAY BPI LAWFUL INTERCEPT

These are the only two IOS's available for the ubr7100 running

12.3.21a-BC4.
Reply to
Eric Hurd

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.