1. Home
  2. Cisco Systems
  3. SYS-6-SYS_LCPERR6 error

SYS-6-SYS_LCPERR6 error

Hi Guys!

I got in my 6509 this log messages:

2006 Feb 01 07:54:12 BrailEast -03:00 %SYS-6-SYS_LCPERR6:Module 3: QChip Port#1 Noc Payload Crc Error: Module needs troubleshooting or TAC assistance 2006 Feb 01 07:54:12 BrailEast -03:00 %SYS-6-SYS_LCPERR6:Module 3: QChip Port#4 Noc Payload Crc Error: Module needs troubleshooting or TAC assistance 2006 Feb 01 07:54:12 BrailEast -03:00 %SYS-6-SYS_LCPERR6:Module 3: QChip Port#5 Noc Payload Crc Error: Module needs troubleshooting or TAC assistance 2006 Feb 01 07:54:12 BrailEast -03:00 %SYS-6-SYS_LCPERR6:Module 3: QChip Port#10 Noc Payload Crc Error: Module needs troubleshooting or TAC assistance 2006 Feb 01 07:54:12 BrailEast -03:00 %SYS-6-SYS_LCPERR6:Module 3: QChip Port#12 Noc Payload Crc Error: Module needs troubleshooting or TAC assistance 2006 Feb 01 07:54:12 BrailEast -03:00 %SYS-6-SYS_LCPERR6:Module 3: QChip Port#14 Noc Payload Crc Error: Module needs troubleshooting or TAC assistance 2006 Feb 01 07:54:12 BrailEast -03:00 %SYS-6-SYS_LCPERR6:Module 3: QChip Port#35 Noc Payload Crc Error: Module needs troubleshooting or TAC assistance 2006 Feb 01 07:54:12 BrailEast -03:00 %SYS-6-SYS_LCPERR6:Module 3: QChip Port#38 Noc Payload Crc Error: Module needs troubleshooting or TAC assistance 2006 Feb 01 07:54:12 BrailEast -03:00 %SYS-6-SYS_LCPERR6:Module 3: QChip Port#40 Noc Payload Crc Error: Module needs troubleshooting or TAC assistance 2006 Feb 01 07:54:12 BrailEast -03:00 %SYS-6-SYS_LCPERR6:Module 3: QChip Port#41 Noc Payload Crc Error: Module needs troubleshooting or TAC assistance 2006 Feb 01 07:54:12 BrailEast -03:00 %SYS-6-SYS_LCPERR6:Module 3: QChip Port#42 Noc Payload Crc Error: Module needs troubleshooting or TAC assistance 2006 Feb 01 07:54:12 BrailEast -03:00 %SYS-6-SYS_LCPERR6:Module 3: QChip Port#43 Noc Payload Crc Error: Module needs troubleshooting or TAC assistance 2006 Feb 01 07:54:12 BrailEast -03:00 %SYS-6-SYS_LCPERR6:Module 3: QChip Port#44 Noc Payload Crc Error: Module needs troubleshooting or TAC assistance 2006 Feb 01 07:54:12 BrailEast -03:00 %SYS-6-SYS_LCPERR6:Module 3: QChip Port#46 Noc Payload Crc Error: Module needs troubleshooting or TAC assistance 2006 Feb 01 07:54:12 BrailEast -03:00 %SYS-6-SYS_LCPERR6:Module 3: QChip Port#47 Noc Payload Crc Error: Module needs troubleshooting or TAC assistance

Do Anyone knowns what this means?

thanks in advance

Gzamboni

Reply to
GZamboni
Loading thread data ...

Nop.. That module still working.

Reply to
GZamboni

look in:

formatting link
The following syslog error message indicates an ASIC error with the WS-X6548-RJ-45 module and the recommended action is to replace the module:

SYS-6-SYS_LCPERR6:Module [dec]: Pentamak Ddr Sync Error

This message has a logging level of 6 but the severity of the error dictates that the logging level should be a 3. This problem is resolved in software release 6.4(13). (CSCef18763)

J.Cottingim

Reply to
jcottingim

Thanks J,

I receive a post in Cisco NetPro forum that explain better these errors:

SYS-6-SYS_LCPERR6Module [dec] QChip Port#[dec] Noc Payload Crc Error Explanation:

This message indicates an error for a specified port. The module detected a payload CRC error in the QChip ASIC. This is a debugging message for Cisco development purposes. The first [dec] is the module number and the second [dec] is the front panel port.

This message can appear when the card is not seated correctly or there is a hardware failure in the card, but it may also appear as a consequence of a software bug. The message appears related only to module 9, so what I would do is:

- Set the diagnostic level to complete "diagnostic level complete"

- Reseat module 3

- "show diagnostic module 3"

Reply to
GZamboni

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.