This IOS version doesn't have ip named access control list.
Doan
>
> ROUTER#sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) C836 Software (C836-K9O3Y6-M), Version 12.2(13)ZH2, EARLY DEPLOYMENT
RELEASE SOFTWARE (fc1)
Synched to technology version 12.2(14.5)T
> TAC Support:
formatting link
Copyright (c) 1986-2003 by cisco Systems, Inc.
> Compiled Tue 22-Jul-03 09:16 by ealyon
> Image text-base: 0x800131E8, data-base: 0x80B8036C
>
> ROM: System Bootstrap, Version 12.2(11r)YV, RELEASE SOFTWARE (fc1)
> ROM: C836 Software (C836-K9O3Y6-M), Version 12.2(13)ZH2, EARLY DEPLOYMENT
RELEASE SOFTWARE (fc1)
> ROUTER uptime is 0 minutes
> System returned to ROM by power-on
> System image file is "flash:c836-k9o3y6-mz.122-13.ZH2.bin"
>
> CISCO C836 (MPC857T) processor (revision 0x200) with 29492K/3276K bytes of memory.
> Processor board ID AMB073103XU (1678418461), with hardware revision 0000
> CPU rev number 7
> Bridging software.
> Basic Rate ISDN software, Version 1.1.
> 1 Ethernet/IEEE 802.3 interface(s)
> 1 ISDN Basic Rate interface(s)
> 1 ATM network interface(s)
> 128K bytes of non-volatile configuration memory.
> 12288K bytes of processor board System flash (Read/Write)
> 2048K bytes of processor board Web flash (Read/Write)
>
> Configuration register is 0x2102
>
> > plz send the show version of the router.
> > there should be no reason why it should not support it.
>
>
>