need to nat inside machines which are in a tunnel cfg, on outside (public int), to a different private block. i.e. other side of tunnel sees new block addresses.
pix nat question
Nov 23, 2005
2 Replies
In article , lfnetworking wrote: :need to nat inside machines which are in a tunnel cfg, on outside :(public int), to a different private block. i.e. other side of tunnel :sees new block addresses.
formatting link
shows the steps for the case where your internal networks overlap with the other network. If the other side does -not- overlap with you, you can just leave out some parts of what I showed there.
i just need to map my inside block to a new private block, so if i understand correctly, i just need to.
static(inside,outside) newprvtnet mask existingprvtblocknet mask
access-list vpn_acl permit ip newprvtnet mask vpnpeernet mask
and add, newprvtnet mask, to the nat 0 acl
??
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required