1. Home
  2. Cisco Systems
  3. NAT question ASA

NAT question ASA

The NAT is working well on ASA. I'm able to connect from inside w/ a private address to all machines in the Internet by getting my source addresses nated. To dig a little in IPv6 I started to setup a tunnel from my workstation to 192.88.99.1. But the firewall will not nat this traffic. It is complaining w/ %ASA-3-305006: regular translation creation failed for protocol 41 src insi= de:10.1.2.3 dst outside:192.88.99.1 Any idea what has to be changed to make this working?

--=20 J=F6rg

--=20 J=F6rg Sch=FCtter

formatting link
snipped-for-privacy@schuetter.org
formatting link
formatting link

Reply to
Jörg Schütter
Loading thread data ...

side:10.1.2.3 dst outside:192.88.99.1

what sort of tunnel? if its an encrypted tunnel then nat won't work.. use an acl to make an exemption to not nat that traffic.

Flamer.

Reply to
die.spam

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.