New to cisco

Currently in my run config, I have a section that looks like the following:

ip classless ip route 0.0.0.0 0.0.0.0 100.100.100.100 ip route 100.100.100.100 255.255.255.255 222.222.222.222 ip route 100.100.100.100 255.255.255.255 222.222.222.222 ip route 100.100.100.100 255.255.255.255 222.222.222.222 ip route 100.100.100.100 255.255.255.255 222.222.222.222 ip route 100.100.100.100 255.255.255.255 222.222.222.222 no ip http server

I'm very new at Cisco and would like to know how I go about adding a line to this section. What commands do I need to use? Thanks in advance!!

Reply to
itdweeb99
Loading thread data ...

enable

config t

exit

c> Currently in my run config, I have a section that looks like the > following:

Reply to
amigan

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.