1. Home
  2. Cisco Systems
  3. n/w device provisioning how?

n/w device provisioning how?

Hi All,

I am new to networking world... what I want to know is about provisioning of network devices as how that happens? are there any dlls etc?

For example: I want to provision an IAD but how can i do that I am struggling in that... Integrated Access Device. (An IAD is a one-box DSL voice and data solution equipment typically installed at the customer's site.)

i hope some one would be able to give some pointers.

Regards, Nitin

Reply to
nitingulati
Loading thread data ...

Carrier provisioning systems is a hugh topic.

To start take a look at the Cisco doc Simple Network-Enabled Auto-Provisioning for Cisco IAD2420 Series IADs

formatting link

Reply to
Merv

Hi..

Thanks for a quick reply,

This link tells how to configure the Cisco IAD2402 using the configurations as "Router(config)# cns event {ipaddress | hostname} {port-number | backup } " is there any api that I can use and configure the same using .net or C++

Nit> Carrier provisioning systems is a hugh topic.

formatting link

Reply to
nitingulati

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.