L2TP tunnel problem

I am having trouble with an L2TP tunnel. I have set up the manual handshake configuration and the tunnel is up and active, but no data seems to be traversing the network. If you guys have any ideas they would be appreciated. Attached is the configurations for the routers in question.

I am trying to switch 172.20.48.x over the link. Oh yeah, please ignore the hostname on the routers, this was originally going to be GRE tunnels.

Thank you,

George

JFK_GRE Router

-------------------------- Current configuration : 1141 bytes ! version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname JFK_GRE ! boot-start-marker boot-end-marker ! enable secret 5 $1$tZ3g$vojTFXEobkFOMeJhb/eNy. ! no aaa new-model ! resource policy ! ip subnet-zero ip cef ! ! l2tp-class class1 ! l2tp-class l2tp-defaults retransmit initial retries 30 cookie size 8 ! ! pseudowire-class ether-tunnel encapsulation l2tpv3 protocol none ip local interface FastEthernet4 ! ! ! ! ! ! ! ! interface FastEthernet0 no cdp enable xconnect 172.20.16.250 123 encapsulation l2tpv3 manual pw-class ether- tunnel l2tp id 222 111 l2tp cookie local 4 12345 l2tp hello l2tp-defaults ! interface FastEthernet1 ! interface FastEthernet2 ! interface FastEthernet3 ! interface FastEthernet4 ip address 172.20.32.250 255.255.240.0 duplex auto speed auto ! interface Vlan1 no ip address ! ip classless ip route 0.0.0.0 0.0.0.0 172.20.32.1 ! no ip http server no ip http secure-server ! ! control-plane ! ! line con 0 no modem enable line aux 0 line vty 0 4 password cisco login ! scheduler max-task-time 5000 end

Elkneck_GRE

--------------------- Current configuration : 1154 bytes ! version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Elkneck_GRE ! boot-start-marker boot-end-marker ! enable secret 5 $1$9eXt$ne3V6bdt/MaUDXnkAYRkJ0 ! no aaa new-model ! resource policy ! ip subnet-zero ip cef ! ! l2tp-class l2tp-defaults retransmit initial retries 30 cookie size 8 ! ! pseudowire-class ether-tunnel encapsulation l2tpv3 protocol none ip local interface FastEthernet4 ! ! ! ! ! ! ! ! interface FastEthernet0 no cdp enable xconnect 172.20.32.250 123 encapsulation l2tpv3 manual pw-class ether- tunnel l2tp id 111 222 l2tp cookie local 4 12345 l2tp cookie remote 4 54321 l2tp hello l2tp-defaults ! interface FastEthernet1 ! interface FastEthernet2 ! interface FastEthernet3 ! interface FastEthernet4 ip address 172.20.16.250 255.255.240.0 duplex auto speed auto ! interface Vlan1 no ip address ! ip classless ip route 0.0.0.0 0.0.0.0 172.20.16.1 ! no ip http server no ip http secure-server ! ! control-plane ! ! line con 0 no modem enable line aux 0 line vty 0 4 password cisco login ! scheduler max-task-time 5000 end

Reply to
gzerphey
Loading thread data ...

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.