Hi All,
I'm a newbie,
I have a Cisco Asa 5510,
I need that an ip on the DMZ net can communicate with a LAN IP on one port..
Is it possibile ? How can I do it ?
Thanks all.
Marco Arfini
How to communicate from DMZ to Lan
Mar 28, 2007
3 Replies
- Create static IP NAT Translation (LAN IP Address to DMZ IP Address)
- Create Access-List to permit certain traffic between these two hosts.
Good luck,
Mike
------ Cisco IP Phone Headset Adapters
formatting link
Supposing you already have an ACL applied in the DMZ you need to add the statement that you need into that ACL. Moreover, perhaps, you need to define an NAT statement between your DMZ and the Inside interface.
If you post the conf (cleansed of all sensitive information) maybe we might help you better.
Alex.
statement that you need into that ACL.
the Inside interface.
help you better.
ok, thanks all,
i solved adding a nat from lan ip to dmz ip! thanks again
Marco Arfini
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required