ASA 5510 QoS

Is there a way for an ASA 5510 to set DSCP on packets?

If not, how do I force each of the four physical interfaces to goto their "router"

Here's our layout:

ASA 5510 Port 0 - INSIDE(192.168.1.0/24) Port 1 - OUTSIDE(75.X.X.X/25) Port 2 - DMZ(10.10.0.0/24)

Right now all hosts in DMZ use the ASA(10.10.0.1) as their default GW. I'd guess to do dscp I need to put a router on the DMZ, and change the default GW of hosts to the router, which then forwards to the ASA.

Or is there a way to make the ASA forward all requests from the DMZ to the router within the DMZ(assume it's 10.10.0.254)?

I'd also need a router for the INSIDE, and OUTSIDE networks.

Thanks. My Default route on the ASA points outside, as this ASA is a VPN endpoint for SITE-TO-SITE tunnels.

Reply to
jrmann1999
Loading thread data ...

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.