Concentrator 3000 and adding routes ?

Question

Hello all. I've got a vpn concentrator. Its management/private address is say:

172.16.16.115

I then have a local network:

192.168.1.x

I also have networks:

192.168.2.x 192.168.3.x - these are network outside of our building and connected to us through a VPN and its address for example is:
192.168.1.115

when I am connected through my cisco vpn I can ping 172.16.16.10 -

172.16.16.110 etc. I can also ping 192.168.1.10 - 192.168.1.110 etc...

I can not ping for example 192.168.2.10 or 192.168.2.110 or

192.168.3.10

Where and what would I add so that my cisco vpn knows thatany traffic for the 192.168.2.0 network needs to goto my other vpn device (192.168.1.115) I am guessing?

where is this added? thanks

Doan · Accepted Answer

Fromm the Configuration menu tree, drill down to System>IP Routing>Reverse RouteInjection.Select the Network Extension Reverse Route Injection check box and click Apply.Doan

paul814 · Answer

OK I have done that and it makes no differance. I then added:

192.168.2.0/255.255.255.0 to the address pool Hold Down routes list. Still nothing, can not get to for example 192.168.2.10

If I do a traceroute to 192.168.2.10 from my local computer not connected through the vpn the trace goes to my local gatewy and then my nortel vpn router 192.168.1.173 and then from there it gets to

192.168.2.10

any ideas?

Route Injection.

Brian V · Answer

In the groups config you are pointing to a network list. You need to edit that network list to include the additional subnets you wish to get to.

paul814 · Answer

Yes I've done that, I have added: 192.168.2.0/0.0.0.255did not do a thing, still can not get to that subnet

Doan · Answer

I take this as these networks are not LAN-to-LAN VPNs?  If so, you canjust add them as static routes on your concentrator.Doan

Concentrator 3000 and adding routes ?

Join the Discussion

Didn't find your answer?