Cisco ASA-5505 and MPLS

Have a Cisco 2431 router with two interfaces e0/0 and e0/1. e0/1 is providing the internet connection and e0/0 will be used for MPLS. the e0/0 int will go into the 3rd port on the ASA-5505 I will route MPLS traffic to that and internet traffis to e0/0 on the ASA. Do I have to use hairpining intra-site and inter-site?

Reply to
Loading thread data ... Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.