cisco => Allied telesyn

from the aux or console port of the cisco can I connect into the console line of the allied telesyn? this will allow a user to telnet to one router and then access the other.

There is no async on the cisco, there is one on the allied.


Reply to
Loading thread data ...

ha scritto nel messaggio news:


Yes, you usually can use your Cisco aux port to connect to another low speed serial port by reverse telnet.

Regards, Gabriele

Reply to
Gabriele Beltrame Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.