Cisco AIR-AP1242AG-E-K9 IOS: c1240-k9w7-mx.124-10b.JA3
I had problems with this wap and I suspected corruption of the firmware so I formatted the flash contents and reloaded a brand new IOS (above) But the web interface now no longer behaves as it used to. On the home page the Network Interfaces section used to display the status of the ethernet, radio0 and radio1 but now it doesn't do that, the heading is there but the data is missing. If I go to Express Setup and enter ip numbers the Apply button doesn't do anything. If I go to Network Interfaces the radios G and A are permanently down and I can't do anything to make them come up. If I go to Express Security and enter and SSID and a wep key nothing happens when I click the Apply button. I've googled quite a few cisco docs but nothing explains what is causing this. Thanks for any help.