1. Home
  2. Cisco Systems
  3. BGP Router Requirement - Private

BGP Router Requirement - Private

I'm implementing an MPLS network where the provider requires our equipment run BGP.

The routing tables on these routers will include only routes to our private networks and will contain routes to less than 100 subnets.

Each connection will be a T1 and the provider recommends a Cisco 2811. I was hoping to re-use existing 1720 and 1750, am I asking for trouble?

I've never used BGP before and am not sure if the greater requirements for it are because of the protocal, the size of the routing tables usually associated with it's implementation or what.

Thanks

Mike

Reply to
nobody
Loading thread data ...

no, I've implemented a thousand of sites like this. A 1721 should fit well.

-- Ivo

formatting link

Reply to
Ivo Mangiavacchi

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.