Belkin Wireless Network Access

Help!

I'm having major problems with my Belkin Wireless Network Access Point(F5D6130):

Lost wireless connection and tried the following:

Powered off/on AP Reset and Powered Off/ON AP Unable to ping the default ip in both cases. ip = 192.168.0.254

Attempted using the PING command and it fails. "Request Timed Out"

I have another PC connected to the network that I'm using to ping the AP.

Any ideas?

Thanks...

Additional info:

Your info is not enough. > like how far the unit is from the wireless access point?? 24 inches > Is your card installed properly. Was it working earlier? Yes.. but I'm

trying to connect to it directly with a cable. No luck.

Did you ping your own pc??? Yes. And I was able to ping Yahoo.com and

other computers on the network.

lemme know about this. If you dont understand what i am refering to then you > are most welcome to ask more questions. Please leave me a note also on my > email. > Sometimes, it is easy to answer if i run out of time and am unable to browse > this newsgroup.
Reply to
Taishi
Loading thread data ...

Hi Taishi,

You may wish to investigate the Belkin Wireless Support web page:

formatting link
Sincerely,

Brad Reese BradReese.Com Cisco Repair Service Experts

formatting link
Hendersonville Road, Suite 17 Asheville, North Carolina USA 28803 USA & Canada: 877-549-2680 International: 828-277-7272

Reply to
www.BradReese.Com

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.