ISDN Router

Have a question or want to start a discussion? Post it! No Registration Necessary.  Now with pictures!

Threaded View


I have 2 cisco 1603 isdn routers and a catalyst 3500 xl switch .

I wiash to use these to mess around before my fanial ccna exam . Can i
connect the BRI interfaces using a xover cable and ppp.

Id like to use them for routing vlans etc and also routing between
eachother.
They have BRI , 10mb ethernet.

Any other suggestions welcome.

Ken


Re: ISDN Router



No, you can't back-to-back ISDN. You'll need a simulator or a pbx. Search
this group for discussions about using Asterix - a linux based pbx.




@fe2.news.blueyonder.co.uk:

Quoted text here. Click to load it



Re: ISDN Router



Quoted text here. Click to load it

If you cannot afford a simulator a cheap alternative which gives you
most but not all of the fuctionality is a AUX back to back connection.

http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a0080093c7b.shtml


Re: ISDN Router


checkout on google for PBX4Linux


Quoted text here. Click to load it




Site Timeline