7960 no IP

Nov 12, 2004 1 Replies
Jump to replies (1)

Need help in troubleshooting our phones. They won't get an IP address and it appears they aren't even looking. Any thoughts? The switch has the vlans configured, I can send that if it helps. Thx in advance



no ip dhcp conflict logging ip dhcp excluded-address 172.28.55.1 172.28.55.19 ip dhcp excluded-address 172.28.55.251 172.28.55.254 ! ip dhcp pool 172.28.55.0_pool network 172.28.55.0 255.255.255.0 default-router 172.28.55.1 dns-server 192.168.30.2 192.168.30.3 domain-name xxxx.com option 150 ip 192.168.21.100 lease 8 ! ip domain name xxxxx.com ip name-server 192.168.30.2 ip name-server 192.168.30.3 no ftp-server write-enable ! ! ! ! interface FastEthernet0/0 no ip address speed 100 full-duplex no cdp enable ! interface FastEthernet0/0.1 encapsulation dot1Q 500 native no cdp enable ! interface FastEthernet0/0.2 bandwidth 100000 encapsulation dot1Q 501 ip address 172.30.55.1 255.255.255.0 ip helper-address 172.30.55.5 no cdp enable ! interface FastEthernet0/0.3 encapsulation dot1Q 510 ip address 172.28.55.1 255.255.255.0 ip helper-address 172.28.55.1 no cdp enable ! interface FastEthernet0/0.4 encapsulation dot1Q 1 ip address 172.25.1.2 255.255.255.0 ip helper-address 172.30.55.5 no cdp enable ! interface Serial0/0 bandwidth 768 no ip address no ip redirects no ip proxy-arp encapsulation frame-relay IETF ip route-cache flow no ip mroute-cache frame-relay lmi-type ansi frame-relay qos-autosense ! interface Serial0/0.1 point-to-point ip address 192.168.32.78 255.255.255.252 no cdp enable frame-relay interface-dlci 16 IETF ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto no cdp enable ! ip default-gateway 192.168.32.77 ip classless ip route 0.0.0.0 0.0.0.0 Serial0/0.1 permanent ip route 172.28.55.0 255.255.255.0 FastEthernet0/0 ip route 172.30.55.0 255.255.255.0 FastEthernet0/0 no ip http server !


Can you post the portion of the config for the port the 7960 is plugged into? If that port setup as a trunk, then you need to turn CDP on and set the voice vlan, otherwise the phone will not know what vlan to use.

-Chris

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required