Hook flash on a Toshiba Strata DK40?

Hi folks -
We have a Toshiba Strata DK40 phone system with a DKT2010-SD handset,
which is hooked up to lines from Vonage (which has worked great so
far)
I'd like to take advantage of the Vonage-native 3-way calling (it's
cheaper and better quality than tying the lines together on the
Toshiba) but I can't figure out how to do the requisite hook-flash to
trigger a second dial-out on the same line, without the unit
disconnecting completely.
Any suggestions? I'm not a telecom wiz, so if you could speak slowly
that would be a help :-)
Thanks!
-- Dave
Reply to
Dave Bushnell
Loading thread data ...
You need to have one of the buttons on the phone programmed as a 'flash' key and set it up as a centrex flash.
Take care, Rich
God bless the USA
Reply to
Rich Piehl
Hey Rich,
Thanks very much for the time to respond. Any idea on the steps to getting this done? Sorry, I warned you I wasn't that experienced here!
Thanks again,
-- Dave
Reply to
Dave Bushnell
If you're not experienced with Toshiba programming it's something best left to somebody who is. Changing the wrong thing in programming could cause you to not be able to get an outside line.
Take care, Rich
God bless the USA
Reply to
Rich Piehl
Try this. After you have answered the call, press CNF/TRN button, #45, wait for new dialtone, then dial the second number. You may hang up at this point, or repeat the above to create a conference call.
James
Reply to
James R. Shaw

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.