1. Home
  2. CCTV, Alarms and other Physical Security
  3. Regency 4720 - final status update for the group

Regency 4720 - final status update for the group

Well it's finally programmed. I ended up defaulting the panel and programming from the keypad. It took a few hours, but everything tests fine. It's hooked to a CS and everything looks great. Thank you to everyone who helped me out with the manuals and advice. The 5530 modem did not work, not sure why that was. Thanks to everyone that sent me software. I would never have been able to do this project without the groups help. Thanks again.

Bill

formatting link
100% Uncensored , 100% Anonymous, 5$/month Only!

Reply to
Bill
Loading thread data ...

I used to love that system- my favorite panel from the early 90's. I'll bet it was a bear to program w/o the programmer, though.

Reply to
Stanley Barthfarkle

It had the 4724 board installed, so it was not as bad as if it was all binary. Just alot of keying through the menus using the keypad. Works great now.

Bill

Reply to
John Brummitt

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.