Pelco-D Honeywell Rapid Eye

We have some Sony NTSC cameras (SCP-3371) on this DVR. Some Presets in the DVR, so I thought. The Presets reside in the Cameras, along with Fixed Iris and Fixed focus. It would be nice to have a switch so the Auto Sense in these cameras (go down to .001 LUX!) will work after a preset. Also, the Stop command is stopping a preset's motion early. The camera doesn't need a stop after a preset. It would be nice to access a switch in the DVR firmware for this also. It might even fix the above problem. Honeywell Programmers? Their security policy has them not able to talk to me.


Reply to
Loading thread data ...

I've always used a Pelco matrix controller for salvos, etc... As long as the can supports the Pelco-D protocol, there has never been a problem.

There are ways around that. Buy one Pelco product and they have to talk to you. Either that, or find a technician/company that has access and pretend you're them.

Reply to
G. Morgan Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.