How do you set the system time on a ADEMCO Vista 50-P?

Question

How do you set the system time on an ADEMCO V-50P system - I can'tseem to find this documented in the manual.Thanks

MDT at Paragon Home Inspection · Accepted Answer

Forget it - of course, AFTER wandering through the manual for 30 minand then posting, I tried scanning for "real time clock", and there itis......

Rapid · Answer

so, how do you do it?"MDT at Paragon Home Inspections, LLC"

MDT at Paragon Home Inspection · Answer

To set system real-time clock date and time on ADEMCO Vista 50-P alarm system panel keypad:

where [is keypad input]

[installer code] OR [master code] + [#63] enters real time clock mode [key in numeric field value] [*] accepts input and advances to next field [*] accepts input to last field, then exits real time clock mode

Rapid · Answer

excellent!"MDT at Paragon Home Inspections, LLC"

Crash Gordon · Answer

Now, if your system is set to send daily tests, you should reset that time as well."MDT at Parag| > so, how do you do it?|| To set system real-time clock date and time on ADEMCO Vista 50-P alarm| system panel keypad:|| where [is keypad input]|| [installer code] OR [master code] + [#63] enters real time clock mode| [key in numeric field value]| [*] accepts input and advances to next field| [*] accepts input to last field, then exits real time clock mode|

How do you set the system time on a ADEMCO Vista 50-P?

Join the Discussion

Didn't find your answer?