Dears, I=B4m need set to default Call Pilot MINI, from serial conection, the system is corrupted before an electric failure.
I=B4m set connect to serial port but Im=B4not find the way for reset to default.
sistem data: Version 1.5.49 of CallPilot Mini Release 1.5 Meridian PBX LA Spanish & Brazilian Portuguese
March 19, 2003
S/W label: CPL_1.5.49 Bootloader: 1.5.21
in terminal the call pilot display the follow mesagge: "Automatic Update Mode Enabled! To Change Update Mode to Manual, press any key within 10 seconds Updating in Automatic Mode!
Initializing ATA Disk... Done.
Initializing PCMCIA Stack ...SSInit: CS_Sockets - 2,Num_PWindows - 8
Card services Init complete found 2 sockets.
Done.
Initializing PCMCIA ATA Disk Drives ...SanDisk SDP 5/3 0.6
AtaInit: completed
Done.
Detecting ATA Cards...
Device found in Slot A:
Model: SanDisk SDCFB-256
Serial: 103314K1302X1213
Rev.: Vdg 1.25
Mounted 10.256
Loading 10.256/CallPilot.bin... |=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-= =08\\=08|=08/=08-=08\\=08|=08/=08-=08 \\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/= =08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08 \\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/= =08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08 \\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/= =08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08 \\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/= =08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08 \\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/= =08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08 \\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/= =08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08 \\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/= =08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08 \\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/= =08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08 \\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/= =08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08 \\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/= =08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08 \\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/= =08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08 \\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/= =08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08 \\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/= =08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08 \\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/= =08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08 \\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/= =08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08 \\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/= =08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08 \\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/= =08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08 \\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/= =08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08\\=08|=08/=08-=08 \\=08|=08/=08-=08\\=08|=08/=08-=08Done.
Unmounting 10.256
Transferring control to the downloaded code
I-Cache ON, D-Cache ON Downloaded OS and application executing from RAM Memory Test Completed Successfully Starting root(RAM) Initializing D-channel driver Initialized for 8 channels Disk volume 3.0.0, initialized... Initializing ATA Disk... Done. Initializing PCMCIA Stack ...SSInit: CS_Sockets - 2,Num_PWindows - 8
Card services Init complete found 2 sockets.
Done. Initializing PCMCIA ATA Disk Drives ...SanDisk SDP 5/3 0.6
AtaInit: completed
Done. Detecting ATA Cards... Card(s) detected Verifying 7.0 PPP: Using hardcoded ip address 192.168.0.2 PPP: Username is CallPilot PPP: Password is administrator PPP: Adding PPP NI...
Standard output device initialized... Pseudo device initialized...
7.1\\safe not found TFTP device initialized...
Login:
Type "test" to stop auto boot
test
Password: Invalid name.
Login: test
Password: Invalid name.
Login: test
Password: Starting Access/2 and Voicemail Opening DSP Msg logfile DSP[0]: 1.50.37.A3 Aug 23, 2002 DSP[1]: 1.50.37.A3 Aug 23, 2002 DSP Abstraction Layer Binding to port 5001 DSP Abstraction Layer Accepting... Language Debug: Reading '7.1\\access2\\runtime\\alarm0.dat'. Read language file '7.1\\access2\\runtime\\alarm0.dat'. Loaded 1 of 1 language file(s). Default language: 0 (hex). "
Thank for your help,
Mario Garcia