I've been able to get it to work with similar equipment; however it was an ACD environment. It didn't work on non-ACD phones.
- Vote on answer
- posted
18 years ago
I've been able to get it to work with similar equipment; however it was an ACD environment. It didn't work on non-ACD phones.
We are trying to network a BCM with a Siemens Hicom. We are trying to get the name to pass back and forth between the two switches over a PRI. Has anyone done this sort of thing?
Do you know how you networked them together? I understand from the Siemens guys that they need to configure the PRI as NQISO to get the name to get passed. But we can't figure out what the BCM protocol should be.
The only thing I know is that QSig can provide you to get names across a PRI between 2 different PABXs. I have done this between Nortel Meridian > Avaya and between a Nortel Meridian > Cisco Callmanager.
So, Qsig is the answer to your problem.
Jacco
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.