11 discussions on Cabling-Design.com Forums about the Cisco 7204VXR: what owners asked, what went wrong, and what fixed it.
I setup ospf routing with 3 routers in our network. All routers arepart of Area 0, as they form the backbone.| RTA |--------| RTB |--------| RTC | * RTA and RTB are Cisco 7204VXR * RTC is a Linux/Quagga Router * RTA and...
Hallo,i have a problem with ignore packets in the interface.Hier are the data:------------------------------------------------------------ROM: System Bootstrap, Version 12.3(4r)T3, RELEASE SOFTWARE (fc1)BOOTLDR: 7200 Software...
I have a Cisco 7204VXR router, I noticed that when I'm usingport:community@routerIP to get traffic on routers interfaces on MRTG, Inoticed that the interfaces changed when I reboot the router.How can correct this?
Hi,On a Cisco 7204VXR i want to configure 2 ATM PVC's, bridged together so they cancommunicate transparently.On the 7204 i configured the interfaces as follows :int atm1/0.162055 point-to-point pvc 16/2055 encap aal5snap bridge-group...
I am experiencing a problem with a Cisco Router 7204VXR with thefastEthernet interface. The board is modelPA-2FE-TX (FE2/0 and FE2/1): the FE2/1 seems to work correctly, while Ihave problems with the FE2/0. Afterputting it up and as soon as...
Hii have a problems with one of my cisco 7204VXR/NPE400:C7204#sh interfaces gigabitEthernet 0/0GigabitEthernet0/0 is up, line protocol is up Hardware is i82543 (Livengood), address is (bia Description: Link with C6500 Internet...