Cisco 2900XL

14 discussions on Cabling-Design.com Forums about the Cisco 2900XL: what owners asked, what went wrong, and what fixed it.

What owners report

3550 RAM

Last Thursday there was a six hour power outage in my building. OnFriday morning I discovered that a 3550 would not boot up. Port 1goes orange and POST halts. I believe this indicates blown RAM.This is particularly disheartening because...

catalyst 2924xl; POST failure

Hello,I have inherited a cisco 2924xl which died on someone. I'm hoping to get it working but fear the worst.The unit fails on power up during the POST tests. Amber lights come on for the first four LEDs in the unit, which indicate...

Routing Problem - 2900XL and 2950 Switches

(Also posted on Cisco Forum)LAN has Switch A (2900XL) connected to Router. Switch B (2950) isconnected to Switch A. Both switches only have VLAN1 and each has itsown IP address. Network info: 192.168.2.0/255.255.255.0.Switch A has server...

Catalyst 2924 XL Help

Hi all;Well it has been a long time since i've been here....nice to be back.I have an old catalyst 2924 xl switch that I am trying to configure formy home network.I have run the basic setup and put in the ip, gateway and subnet aswell as...

Password recovery - 2900XL

Hello all,I am about to perform a password recovery on a Catalyst 2900 XL switch.Got the directions straight off of Cisco's website.But I have a question that would require the knowledge of anexperianced user.It goes like this....if I...

All discussions