Hi, I have established a VPN between two ZyWALL 5 routers in two different places. Both are connected to the DSL Internet connection with fixed IP address.
My configuration looks like this:
Branch A
- ZyWALL WAN IP- xxx.xxx.xxx.86
- Key Management - IKE
- Local IP Address - 192.168.0.1 - 192.168.0.253
- Remote IP Address - 192.168.10.1 - 192.168.10.253
- Encap. - Tunnel
- IPSec Algorithm - ESP DES SHA1
- Secure Gateway Address - xx.xx.xxx.146
- Authentication Method - Pre-Shared Key
- My IP Address - 0.0.0.0
Branch B
- ZyWALL WAN IP- xxx.xxx.xxx.86
- Key Management - IKE
- Local IP Address - 192.168.10.1 - 192.168.10.253
- Remote IP Address - 192.168.0.1 - 192.168.0.253
- Encap. - Tunnel
- IPSec Algorithm - ESP DES SHA1
- Secure Gateway Address - xx.xx.xxx.86
- Authentication Method - Pre-Shared Key
- My IP Address - 0.0.0.0
I can see that the tunnel between branches is established with success, but cannot reach (i.e. ping) hosts from A to B and oposite.
Why is that?
For any help thanks in advance With best regards Mike