Static route or NAT


We use a pfsense

formatting link

Now say that I have three lan nics (in addition to wan) in this box. Nic1 at, Nic2 at and Nic3 at, both Nic1 and Nic3 with default rules as of wan access (Internet works ok)..

In addition, any traffic from either Nic1 or Nic3 to subnet should be routed via Nic2. Nic2 is connected to another router with ip (Another port on that other router is connected to the subnet which Ni1 and Nic3 need to communicate with).

Do I use static routes or nat in this case? Traffic to the subnet from workstations connected to Nic1 and Nic3 should be routed via to find the net.

pfsense's static routes form contains the following fields: Interface destination network subnet mask gateway

Thanks a lot if someone can help me put in the right route here


Reply to
Loading thread data ... Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.