Cisco Systems

  1. Home
  2. Cisco Systems
14701 Threads Posts
to

Worth reading in Cisco Systems

Cisco VPN client CRL checking

Hi, I'm not sure about following statement. Suppose I configure IPSec VPN with certificate authentication for Cisco VPN...
1 comments posted 19yrs
posted by martin.rublik
1 comments posted 19yrs posted by martin.rublik

SNMPv3 and Community String Indexing

hi, how can I realize csi with snmpv3? read mac addresses from vlan 3 with snmpv2 : snmpwalk -v 2c ... -c public@3 swit...
0 comments posted 19yrs
posted by mysterieman
0 comments posted 19yrs posted by mysterieman

Cisco Router backup isdn

Hi i have 3 interfaces interface FastEthernet0/0 192.168.164.10 255.255.255.0 --- nat interface FastEthernet0/1 195.222...
1 comments posted 19yrs
posted by a.smajlovic
1 comments posted 19yrs posted by a.smajlovic

Cisco Soho 91 and cable modem

Hi, I'm having difficulty setting up a Cisco Soho 91 with a cable modem. Can someone tell me if this config looks wrong...
0 comments posted 19yrs
posted by felix1
0 comments posted 19yrs posted by felix1

PIX 525, I think I need Policy-based routing??

the picture: PIX has one External interface to the ISP PIX has one Inside interface to the network PIX has 3rd interfac...
4 comments posted 19yrs
posted by arthur_brain1
4 comments posted 19yrs posted by arthur_brain1

Input & Output bytes question

Hello, This is a simple question that I can't figure out I have a router with 3 serial interface and 1 ethernet interfa...
1 comments posted 19yrs
posted by sales
1 comments posted 19yrs posted by sales

as5350 question - Please help

I setup the VOIP network with H323. All calls are Gatekeeper routed. When I make a PSTN call either inbound or outbound...
0 comments posted 19yrs
posted by happyclik
0 comments posted 19yrs posted by happyclik

nat and asymmetric routing

Is it possible to nat outbound (using same addresses) out a different interface than the incoming interface? The lan de...
2 comments posted 19yrs
posted by billf
2 comments posted 19yrs posted by billf

CRC & INPUT Errors

Hello, I have a Cisco 2500 Series router, and lately I've been getting a lot of CRC & Input errors on the ethernet inte...
5 comments posted 19yrs
posted by sales
5 comments posted 19yrs posted by sales

Pix 515 - upgrade from 635 to 722 - sendmail breaks

Hello, I am having a problem that I can't seem to figure where to look. My original setup is sendmail on Linux in a DMZ...
0 comments posted 19yrs
posted by raider.adam
0 comments posted 19yrs posted by raider.adam

Pix 506e forward port

I just got a cisco pix 506e working with my verizon fios internet access. I was able to set up the pppoe protocol, and...
1 comments posted 19yrs
posted by alfredo.palacios
1 comments posted 19yrs posted by alfredo.palacios

1242AG and WPA-PSK?

Is it possible to run a 1242AG as a "Normal home use AP" with WPA-PSK? I can't find anything in the gui to that effect?
1 comments posted 19yrs
posted by mupp.net
1 comments posted 19yrs posted by mupp.net

Pix 515 - upgrade from 635 to 722 - sendmail breaks

Hello, I am having a problem that I can't seem to figure where to look. My original setup is sendmail on Linux in a DMZ...
0 comments posted 19yrs
posted by raider.adam
0 comments posted 19yrs posted by raider.adam