Cisco Systems

  1. Home
  2. Cisco Systems
14701 Threads Posts
to

50% packet loss ?

Hi. What does it meen when my ping reply is !.!.!.!.!.!.!. for one IP-address. In LAN the ping reply is !!!!!!!! but fro...
3 comments posted 18yrs
posted by no
3 comments posted 18yrs posted by no

ATM SVC : information elments...

For ATM SVCs : is the OUI field in the Broadband Higher Layer Info ( BHLI) field a constant value. i.e. a fixed identif...
0 comments posted 18yrs
posted by thetalkingblob
0 comments posted 18yrs posted by thetalkingblob

Initiating multiple RFC1483 ( bridge ) ATM SVCs.

I have a series 3600 router with IOS 12.3 with an ATM card ( OC3 ). Is it possible to have the router initiate more tha...
0 comments posted 18yrs
posted by thetalkingblob
0 comments posted 18yrs posted by thetalkingblob

VLAN Issue

2811 connected to 3548. Simple, but one VLAN fails. I have adopted a network and have seen this config before as on the...
1 comments posted 18yrs
posted by gshine
1 comments posted 18yrs posted by gshine

ASA na local users

Hi How to disable SSH access or enable access for selected users on ASA5510 (SW version is 7.2). Is it possible ? Curre...
0 comments posted 18yrs
posted by robhass
0 comments posted 18yrs posted by robhass

ICMP Redirect Query?

If I have a router with a single interface on 192.168.1.254 configured as default gateway for LAN clients on 192.168.1....
2 comments posted 18yrs
posted by usenet
2 comments posted 18yrs posted by usenet

Changing SSH Port on Cisco Router

I was asked if it was possible to change the default port for SSH access to a Cisco router. Can that be done? Regards, F...
6 comments posted 18yrs
posted by fatkinson
6 comments posted 18yrs posted by fatkinson

Concentrator 3000 and adding routes ?

Hello all. I've got a vpn concentrator. Its management/private address is say: 172.16.16.115 I then have a local networ...
5 comments posted 18yrs
posted by paul814
5 comments posted 18yrs posted by paul814

2924XL SNMP MAC Table Read Oddity

Can anyone help with this, it's got me puzzled as to why I can't obtain the MAC table via SNMP from my 2924XL switches....
6 comments posted 18yrs
posted by gpf
6 comments posted 18yrs posted by gpf

Block arp packets on Catalyst switch

Hi, I'm trying to completely block arp packets per port. if not possible on a port, then blocking arp packets on a vlan...
7 comments posted 18yrs
posted by cdtoews.spam
7 comments posted 18yrs posted by cdtoews.spam

Auto Negotiating or Static Speed?

Hi there, I have a basic question about Auto Negotiation in a switch-server enviroment. Does Auto-Negotiation between a...
9 comments posted 18yrs
posted by aheinzelmann
9 comments posted 18yrs posted by aheinzelmann

Logging to DMZ 5.6.7.8 tcp/1468 is disabled

Dear all, we have configured another logging host .... .... logging on logging trap debugging logging console debugging...
0 comments posted 18yrs
posted by rainer.blaes
0 comments posted 18yrs posted by rainer.blaes

How To Refresh MAC Table?

I've got a stack of 3750s running 12.1.14. I've got CAT5 ethernet cables plugged into ports Gi3/0/12 and Gi3/0/18. The...
2 comments posted 18yrs
posted by JohnD
2 comments posted 18yrs posted by JohnD

cisco vpn

I am planning to connect 10 remote offices to central office with cisco routers, and use site-to-site IPSEC connections...
0 comments posted 18yrs
posted by rzirzi
0 comments posted 18yrs posted by rzirzi