1. Home
  2. Cisco Systems
  3. WLC service-group settings

WLC service-group settings

After checking the WLCs at several sites using the WLC Config Analyzer, one of the errors that came up was that the service-port interface was invalid because it was set to 0.0.0.0. We're not using the service-port interface, so how should this be set? In the web interface, if I uncheck DHCP, it wants a real static IP address... should I use 127.0.0.1? Do I need to do this in the CLI?

Reply to
pfisterfarm
Loading thread data ...

You can leave it set to DHCP, and ignore any errors. If you want to set a value, give it an ip address and mask that is not valid on your network, such as 1.1.1.1, 255.255.255.0. Do NOT set it the value to 127.0.0.1!!!!

Reply to
Thrill5

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.