Hello,
Hope someone can share thoughts on how best to set this up. I am trying to pass syslog from outside interface to server that sits behind pix firewall. Details as follows.
Cisco2811
192.168.1.1 (LAN) 255.255.255.0 Kiwi Syslog on UDP port 514Cisco Pix
192.168.1.2 (Outside Interface) 192.168.150.1 (Inside Interface) 255.255.255.0Syslog sitting on:
192.168.150.27 255.255.225.0I setup the 2811 to pass the syslog to 192.168.1.2 Trying to get the Pix to route all inbound UPD 514 traffic from the Cisco 2811 to 192.168.150.27. I would like to keep the outside Cisco
2811 traffic visable in the syslog so I can tell between Pix, 2811, and VPN 2005 that is logging to..Does anyof this make sense? Thanks in advance for any feedback.