I have a 1900 running Cisco Catalyst 1900/2820 Enterprise Edition Software Version V8.01.02.
I have to make alot of changes to the ports, going from half duplex to full duplex.
Is there a command that I can do this with instead of doing it one by one?
CLI only!!
Many thanks
F.
I do not believe so. There is a command in recent version of IOS, which is :
interface range ethernet0/0 - 6 duplex full speed 100
(for example) but it's not feasible on 1900's. Perhaps there's another way.. sorry I can't help more!
Olivier
Have something to add? Share your thoughts — no account required.
Ask the community — no account required