SSL VPN (anyconnect) setup on ASA

Licensed features for this platform: Maximum Physical Interfaces : Unlimited Maximum VLANs : 100 Inside Hosts : Unlimited Failover : Active/Active VPN-DES : Enabled VPN-3DES-AES : Enabled Security Contexts : 2 GTP/GPRS : Disabled VPN Peers : 250 WebVPN Peers : 25 AnyConnect for Mobile : Disabled AnyConnect for Linksys phone : Disabled Advanced Endpoint Assessment : Disabled UC Proxy Sessions : 2

This platform has an ASA 5510 Security Plus license.

sh run# .... webvpn enable outside svc image disk0:/anyconnect-win-2.2.0140-k9.pkg 1 svc image disk0:/anyconnect-macosx-powerpc-2.2.0140-k9.pkg 2 svc image disk0:/anyconnect-macosx-i386-2.2.0140-k9.pkg 3 svc image disk0:/anyconnect-linux-2.2.0140-k9.pkg 4

Curious why I'm still seeing this..

# sh webvpn svc SSL VPN Client is not enabled.

Reply to
linguafr
Loading thread data ...

You are are missing the "svc enable" under the webvpn section.

Doan

Reply to
Doan

Hai,

I am naveen can u provide the Show version and Sh config of ASA with contest's also pls....

Thanq....

Reply to
Nani_Guntur

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.