SDM problem

I erased the whole flash, reinstalled the IOS 12.4.1. It works. Then I installed the SDM 2.11. The installation went fine without any problem but when I start https://router-ip, I get the error "This page cannot be displayed".

When I manually telnet to the router at port 80 and 443, the connection request is accepted so I think the server is running.

Here is the listing of flash memory : CompactFlash directory: File Length Name/status 1 33488560 c2800nm-adventerprisek9-mz.124-1a.bin 2 780 vlan.dat 3 1038 home.shtml 4 1648 sdmconfig-2811.cfg 5 113152 home.tar 6 820224 common.tar 7 3085312 sdm.tar 8 763392 es.tar 9 504643 128MB.sdf 10 1208320 ips.tar [39987712 bytes used, 24237564 available, 64225276 total]

62720K bytes of ATA CompactFlash (Read/Write)

Any advice is really appreciated.

DT

Reply to
dt1649651
Loading thread data ...

AAgrhhh, I left the not-yet-finished installation of webvpn in the config. :-)

DT

Reply to
dt1649651

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.