pix7.0 is available for download and I've done it. But how to install asdm which replace pdm?
thanks
pix7.0 is available for download and I've done it. But how to install asdm which replace pdm?
thanks
I should be somethng like PDM. Tftp it to the PIX to see? Unless, hum, I'd be really surprised there is no info about that on CCO.
Cheers,
Nicholas Wheeler
I tried it and tftp do not want to copy it to flash, like something is wrong with tftp server, wich is ok because I tested it with tftp client and pix do copy config to tftp.
Hi Dragan,
Cisco is working on implementing IKEv2 with an estimated release date in the fourth quarter of the calendar year 2005.
Did you try Mike's suggestion?
copy tftp:///asdm-501.bin flash:pdm
----------------------------------------------------------
Don't forget to order memory upgrade kits on the 515/515Es.
PIX-515-MEM-32=3D
Cisco PIX 515/515E Restricted Platform License memory upgrade from 32 to 64 MB
PIX-515-MEM-128=3D
Cisco PIX 515/515E Unrestricted/Failover Platform License memory upgrade from 64 to 128 MB
Sincerely,
Brad Reese BradReese.Com=AE Cisco Resource Center Toll Free: 877-549-2680 International: 828-277-7272 Website:
Yes I did and it says
Accessing tftp://x.x.x.x/asdm-501.bin... WARNING: TFTP download incomplete!
%Error reading tftp://x.x.x.x/asdm-501.bin (Unspecified Error)
"BradReeseCom" wrote:
Dragan Skundric snipped-for-privacy@bj.htnet.hr
I did it. Using FTP and not TFTP Dragan Skundric snipped-for-privacy@bj.htnet.hr
Hi Dragan,
Excellent.
Brad Reese BradReese.Com=AE Cisco Certified Network Engineer Jobs Website:
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.