Hi
I have a 2950G-24, the running-config is 8400 bytes in size, the startup-config is 8000 bytes in size, the nvram has 32768 bytes in total but 'dir all-filesytems' says there is only 73 bytes free so I cannot save the running to startup. I know I can increase the buffersize but -
I also have a 3550-24 and on this unit I have over 20K bytes free with the same config installed
Any ideas ??
Thanks
Carl
Can you post output from "show nvram:" or equivalent for your specific platform? You could have some more files on it or vlan.dat or some other things (defpends how new is your IOS).
here it is
router#dir all-filesystems Directory of flash:/
2 -rwx 323 Mar 16 2005 18:25:34 env_vars 81 -rwx 1396 Mar 16 2005 16:18:46 vlan.dat 82 -rwx 7968 Mar 16 2005 18:23:51 config.text 83 -rwx 99 Mar 16 2005 18:23:51 private-config.text 84 -rwx 8389 Mar 16 2005 18:24:52 start.cfg 7 -rwx 2959275 Mar 01 1993 00:16:41 c2950-i6q4l2-mz.121-14.EA1.bin 8 drwx 2304 Mar 01 1993 00:18:08 html 22 -rwx 109 Mar 01 1993 00:18:11 info 23 -rwx 109 Mar 01 1993 00:18:11 info.ver7741440 bytes total (2463744 bytes free) Directory of nvram:/
25 -rw- 7968 startup-config 26 ---- 99 private-config32768 bytes total (73 bytes free) Directory of system:/
2 dr-x 0 memory 1 -rw- 8389 running-configNo space information available
To get around this for now I copied the running to flash:/start.cfg and changed the boot config-file path to flash:/start.cfg
Regards
Carl
Hi
FYI
2950 pre 12.1(20)EA1 contains a bug where some nvram isn't released upon config writes, the bug ID is CSCeb45692IOS upgrade ;)
Carl
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.