Multiple internal networks

Oct 30, 2005 3 Replies

We have some basic PIX and/or routing knowledge but cannot configure a tunnel from one site to another with traffic to multiple inside networks on one side of the tunnel. We are using PIX 501s on each side.



Trying to configure a vpn tunnel between sites. Network to network traffic is good. When we to pass traffic to another network it fails.



Network A:


10.1.1.0

Network B:


192.168.xx.0
192.21.xx.0

Inside interface of PIX for Network B:


192.168.xx.231

Traffic via tunnel from 10.1.1.0 to 192.168.xx.0 is working. Traffic from



192.168.xx.231 to the 192.21.xx.0 and from 192.21.xx.0 to the 192.168.xx.231 does not seem to work.

Unable to ping 192.168.xx.231 from 192.21.xx.0 network.



Should this work?


We have some basic PIX and/or routing knowledge but cannot configure a tunnel from one site to another with traffic to multiple inside networks on one side of the tunnel. We are using PIX 501s on each side.

Trying to configure a vpn tunnel between sites. Network to network traffic is good. When we to pass traffic to another network it fails.

Network A:

Inside interface network: 10.1.1.0 Inside interface address: 10.1.1.2

Network B:

Inside interface network: 192.168.xx.0 Inside interface address: 192.168.xx.231

Second network we wish to use via a router: 192.21.xx.0

Inside interface of PIX for Network B: 192.168.xx.231

Traffic via tunnel from 10.1.1.0 to 192.168.xx.0 is working. Traffic from

192.168.xx.231 to the 192.21.xx.0 and from 192.21.xx.0 to the 192.168.xx.231 does not seem to work.

Unable to ping 192.168.xx.231 from 192.21.xx.0 network.

Should this work?

In article , Frank wrote: :We have some basic PIX and/or routing knowledge but cannot configure a :tunnel from one site to another with traffic to multiple inside networks on :one side of the tunnel. We are using PIX 501s on each side.

:Trying to configure a vpn tunnel between sites. Network to network traffic :is good. When we to pass traffic to another network it fails.

:Second network we wish to use via a router: 192.21.xx.0

route inside 192.21.xx.0 255.255.255.0 INSIDEROUTERIP

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required