Hi
I have big problems trying to get SNMP info through a PIX firewall.
At our LAN segment, I have setup a Linux/MRTG PC, which I want to read info from our Internet router, placed at the external interface of our PIX: When I try to connect to the router from the MRTG PC, I got nothing. I have no problems getting info from switches etc., as long as they are placed at the same network as the MRTG PC.
What am I doing wrong ?
snmp-server host inside 192.168.15.208 poll
access-list outbound permit tcp host 192.168.15.208 any snmp-server host inside 192.168.15.208 poll
sorry forgot one-line
where 192.168.15.208 is your inside MRTG PC
I would suspect that you have permitted the inside IP address to poll, but the PIX is translating it to a public IP address. If possible, map your graphing server to an open IP address and allow this in your list.
Wil my 3¢
Brian P. wrote:
Have something to add? Share your thoughts — no account required.
Ask the community — no account required