1. Home
  2. Cisco Systems
  3. ISDN BRI dial-up access!

ISDN BRI dial-up access!

Good day! I have a problem. i`ll try to do a phone call but the line is busy!

Log

*Mar 1 10:43:09.692: ISDN BR0/0 EVENT: service_queue_from_physical_layer: Recvd L1 prim 1 state is 3 *Mar 1 10:43:09.692: ISDN BR0/0 EVENT: isdn_sw_cstate: State = 4, Old State = 4 *Mar 1 10:43:09.692: ISDN BR0/0 EVENT: service_queue_from_physical_layer: Recvd L1 prim 6 state is 1 *Mar 1 10:43:09.692: ISDN BR0/0 EVENTd: service_queue_from_physical_layer: Recvd MPH_EI2_IND from L1 *Mar 1 10:43:09.696: ISDN BR0/0 BACKHAUL: L3IF_rx_L2_pak: received data 0x0001 *Mar 1 10:43:09.700: ISDN BR0/0 SERROR: L2_Go: at bailout DLCB is NULL

L2: sapi 63 tei 127 ces 0 ev 0x650

*Mar 1 10:43:09.732: ISDN BR0/0 BACKHAUL: L3IF_rx_L2_pak: received data 0x0F00560283 *Mar 1 10:43:09.736: ISDN BR0/0 SERROR: L2_Go: at bailout DLCB is NULL

L2: sapi 63 tei 127 ces 0 ev 0x3

*Mar 1 10:43:09.760: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/0, TEI 65 changed to up *Mar 1 10:43:09.828: ISDN BR0/0 Q931: RX CALL_PROC pd = 8 callref = 0x8F Channel ID i = 0x8A *Mar 1 10:43:09.876: ISDN BR0/0 Q931: TX -> DISCONNECT pd = 8 callref = 0x8F Cause i = 0x80BA - Bearer capability not available *Mar 1 10:43:09.913: ISDN BR0/0 Q931: RX RELEASE pd = 8 callref = 0x8F Cause i = 0x80E5 - Message not compatible with call state *Mar 1 10:43:09.953: ISDN BR0/0 Q931: RX
Reply to
NeoN
Loading thread data ...

Your call is call is coming as a voice call, and the router does not know what to do it, so it throws out a busy. ISDN is not like analog where you call the number from your desk and see if you can hear modem tones. ISDN data calls, come in as DATA.

Scott

Reply to
thrill5

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.