Hello I moved router to a different office, We switched from adsl to fiber, I changed the ip and default gateway. Now I am getting constant disconnects from my crypto maps and ping timeouts to this remote router. The external interface shows the following output senko-shz#show interfaces ethernet 0 Ethernet0 is up, line protocol is up Hardware is PQUICC Ethernet, address is (bia ) Description: Connected to Internet Internet address is MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 10BaseT ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters 00:16:23 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 8000 bits/sec, 6 packets/sec 5 minute output rate 5000 bits/sec, 4 packets/sec 3526 packets input, 642599 bytes, 0 no buffer Received 1905 broadcasts, 0 runts, 0 giants, 0 throttles 5 input errors, 5 CRC, 0 frame, 0 overrun, 0 ignored 0 input packets with dribble condition detected 1648 packets output, 529051 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out
Can anyone tell me what could be the problem?