How to configure nat?

Hello, I have the following problem.

I have a main Server with the IP The server connects to different sites using ISDN. Now one site has the same LAN IP network as mine. How do I have to configure the RemoteRouter to nat my address to e.g. and if someone answers from the remote location to translate back to

I thought ip nat inside will do the trick - but I can't get it working I configured on the remote router ip nat inside source static on the bri interface I configured ip nat inside. The cisco documentation states if I use static natting then incoming and outgoing pakets will bet translated vice versa.

So what's wrong

Thank you Egon

Reply to
Loading thread data ...

make sure you put ip nat inside on your internal interface and ip nat outside on your external

Reply to

hi datakazam,

I forgot the ip nat outside. Thx


Reply to
Egon Hehn Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.